Specifications
Interface |
1000BASE-T, 100BASE-TX, 10BASE-T, IEEE 802.11 a/b/g |
|
Frame type |
Ethernet II, IEEE 802.2, IEEE 802.3, SNAP |
|
Printer (LAN-Fax) |
TCP/IP (IPv4/IPv6) |
|
LPR |
||
RSH |
||
RCP |
||
DIPRINT |
||
FTP |
||
IPP |
||
IPP-SSL |
||
RHPP |
||
IPX/SPX (NetWare) |
||
AppleTalk |
||
SMB |
||
WSD (Printer) |
||
Internet Fax |
TCP/IP (IPv4/IPv6) |
|
SMTP |
||
SMTP-C |
||
POP3 |
||
IMAP4 |
||
Network Scanner |
IPv4 |
|
FTP |
||
FTP-C |
||
SMTP |
||
SMTP-C |
||
POP3 |
||
SMB |
||
NCP |
||
WSD (Scanner) |
||
Management Function |
TCP/IP (IPv4/IPv6) |
|
RSH |
||
RCP |
||
FTP |
||
FTP-C |
||
SNMP |
||
SNMP-C |
||
HTTP |
||
HTTPS |
||
TELNET (mshell) |
||
NBT |
||
DHCP |
||
DNS |
||
DNS-C |
||
LDAP |
||
To use IPP and SMB, use the SmartDeviceMonitor for Client port.
To use IPP under Windows XP/Vista, Windows Server 2003/2003 R2/2008, use the Standard IPP port.
To use IPP under Windows 2000, use SmartDeviceMonitor for Client.
AppleTalk can be used when the PostScript 3 module is installed.
Under Windows Vista, or Windows Server 2008, WSD (Printer), WSD (Scanner), uses the WSD Port.
Only the rsh/rcp commands in Unix OS standard command set are supported.
