Skip header
 

Top Page > Network and System Settings Guide > Monitoring and Configuring the Printer > Remote Maintenance by telnet > ssh

ssh

Use the “ssh” command to view and configure SSH settings.

View settings

msh> ssh

Data compression communication settings

msh> ssh compression {on|off}

  • The default is “on”.

SSH/SFTP communication port setting

msh> ssh port [22, 1024-65535]

  • The default is 22.

SSH/SFTP communication timeout setting

msh> ssh timeout [0-65535]

  • The default is 300.

SSH/SFTP communication login timeout setting

msh> ssh logintimeout [0-65535]

  • The default is 300.

Setting an open key for SSH/SFTP

msh> ssh genkey {512|768|1024} “character string”

  • Create an open key for SSH/SFTP communication.

  • Usable characters are ASCII 0x20-0x7e (32 bytes) other than "0".

  • The default key length is 1024, and the character string is blank.

  • If you do not specify this parameter, an open key with the default value will be created.

Deleting open key for ssh/sftp communication

msh> ssh delkey

Note

  • If you do not specify a character string, current setting is displayed.

  • ssh can be used only with sftp.