Skip header
 

bonjour

Use the “bonjour” command to display Bonjour-related settings.

View settings

Bonjour settings are displayed.

msh> bonjour

Bonjour service name setting

You can specify the Bonjour service name.

msh> bonjour cname “computer name”

  • The computer name can be entered using up to 63 alphanumeric characters.

  • If you do not specify a character string, the current setting is displayed.

Bonjour Installation location information setting

You can enter information about the location where the printer is installed.

msh> bonjour location “location”

  • Information about location can be entered using up to 32 alphanumeric characters.

  • If you do not specify a character string, current setting is displayed.

Setting order of priority for each protocol

  • msh> bonjour diprint [0-99]

  • msh> bonjour lpr [0-99]

  • msh> bonjour ipp [0-99]

You can specify the order of priority for “diprint”, “lpr”, and “ipp”. Smaller numbers indicate higher priority.

IP TTL setting

msh> bonjour ip ttl [1-255]

You can specify the IP TTL (the number of routers a packet can pass through).

  • The default is 255.

Resetting the computer name and location information

You can reset the computer name and location information.

msh> bonjour clear {cname|location}

  • cname: Reset the computer name. The default computer name will be displayed when the computer is restarted.

  • location: Reset the location information. The previous location information will be deleted.

Interface configuration

msh> bonjour linklocal “interface_name”

  • If you do not specify an interface, the Ethernet interface is selected automatically.

  • If many types of interface are installed, configure the interface that communicates with linklocal address.

  • If you do not specify an interface, the Ethernet interface is automatically selected.

  • wlan can be specified only when the IEEE 802.11 interface is installed.

Interface

Interface configured

ether

Ethernet interface

wlan

IEEE 802.11 interface

Setting IPP-SSL printing

msh> bonjour ippport {ipp|ssl}

  • If IPP-SSL Printing is set to ssl, the IPP port number will appear as 443, and IPP-SSL printing can be performed with higher security.

  • If IPP-SSL Printing is set to ipp, the IPP port number will appear as 631. Port 631 is the port for normal IPP printing.