Skip header
 

Changing Name and Comment

Follow the procedure below to change the name and comment for the machine.

1Start SmartDeviceMonitor for Admin.

2On the [Group] menu, point to [Search Device], and then click [IPv4], [IPX/SPX] or [IPv4 SNMPv3].

A list of machines using the selected protocol appears.

Select the protocol of the machine whose configuration you want to change.

If you are using IPv4 SNMPv3, enter the user authentication.

3Select a machine in the list, and then click [NIB Setup Tool] on the [Tools] menu.

A Web browser opens and the window for entering the login user name and password for the Web Image Monitor administrator appears.

NIB Setup Tool starts when the network interface board is default. Follow the instructions on the screen.

4Enter the login user name and password, and then click [Login].

For details about the login user name and password, consult your network administrator.

5Click [Configuration].

6Click [System] on the [Device Settings] area, and then change the settings.

7Click [OK].

8Click [Logout].

9Quit Web Image Monitor.

10Quit SmartDeviceMonitor for Admin.

Note

  • In the [Device Name] box, enter a device name on the machine using up to 31 characters.

  • In the [Comment] box, enter a comment on the machine using up to 31 characters.

  • For details about login user names and passwords, see Security Reference, which is the administrator's manual.

  • For details about Web Image Monitor, see “Using Web Image Monitor”.