Skip header
 

Ethernet

This section lists the settings required for sending files with an Ethernet connection.

For details about how to specify the settings, see "Interface Settings" and "File Transfer".

Menu

User Tool

Setting Requirements

Interface Settings/Network

Machine IPv4 Address

Necessary

Interface Settings/Network

IPv4 Gateway Address

Necessary

Interface Settings/Network

Machine IPv6 Address

As required

Interface Settings/Network

IPv6 Gateway Address

As required

Interface Settings/Network

IPv6 Stateless Setting

As required

Interface Settings/Network

DNS Configuration

As required

Interface Settings/Network

DDNS Configuration

As required

Interface Settings/Network

IPsec

As required

Interface Settings/Network

Domain Name

As required

Interface Settings/Network

WINS Configuration

As required

Interface Settings/Network

Effective Protocol

Necessary

Interface Settings/Network

Ethernet Speed

As required

Interface Settings/Network

IEEE802.1X Auth.(Ethernet)

As required

Interface Settings/Network

LAN Type

Necessary

Interface Settings/Network

Permit SNMPv3 Communictn.

As required

Interface Settings/Network

Permit SSL/TLS Comm.

As required

Interface Settings/Network

Host Name

As required

File Transfer

Default User Name/PW(Send)

As required

Note

  • For the Effective Protocol setting, check that the protocol you want to use is set to [Active].

  • [LAN Type] is displayed when the wireless LAN interface board is installed. If both Ethernet and wireless LAN are connected, the selected interface takes precedence.