Skip header
 

Wireless LAN

This section lists the settings required for sending e-mail with an Wireless LAN connection.

For details about how to specify the settings, see "Interface Settings" and "File Transfer".

Menu

User Tool

Setting Requirements

Interface Settings/Network

Machine IPv4 Address

Necessary

Interface Settings/Network

IPv4 Gateway Address

Necessary

Interface Settings/Network

Machine IPv6 Address

As required

Interface Settings/Network

IPv6 Gateway Address

As required

Interface Settings/Network

IPv6 Stateless Setting

As required

Interface Settings/Network

DNS Configuration

As required

Interface Settings/Network

DDNS Configuration

As required

Interface Settings/Network

IPsec

As required

Interface Settings/Network

Domain Name

As required

Interface Settings/Network

WINS Configuration

As required

Interface Settings/Network

Effective Protocol

Necessary

Interface Settings/Network

LAN Type

Necessary

Interface Settings/Network

Permit SNMPv3 Communictn.

As required

Interface Settings/Network

Permit SSL/TLS Comm.

As required

Interface Settings/Network

Host Name

As required

Interface Settings/Wireless LAN

Communication Mode

Necessary

Interface Settings/Wireless LAN

SSID Setting

As required

Interface Settings/Wireless LAN

Ad-hoc Channel

As required

Interface Settings/Wireless LAN

Security Method

As required

File Transfer

SMTP Server

Necessary

File Transfer

SMTP Authentication

As required

File Transfer

POP before SMTP

As required

File Transfer

Reception Protocol

As required

File Transfer

POP3/IMAP4 Settings

As required

File Transfer

Admin. E-mail Address

As required

File Transfer

E-mail Communication Port

As required

Note

  • For the Effective Protocol setting, check that the protocol you want to use is set to [Active].

  • [LAN Type] is displayed when the wireless LAN interface board is installed. If both Ethernet and wireless LAN are connected, the selected interface takes precedence.

  • When POP before SMTP is set to [On], you must also make settings for Reception Protocol and POP3/IMAP4 Settings.

  • When setting POP before SMTP to [On], check POP3 port number in E-mail Communication Port.