Skip header
 

Ethernet

This section lists the settings required for using Internet Fax with an Ethernet connection.

For details about how to specify the settings, see "Interface Settings" and "File Transfer".

Menu

User Tool

Setting Requirements

Interface Settings/Network

Machine IPv4 Address

Necessary

Interface Settings/Network

IPv4 Gateway Address

Necessary

Interface Settings/Network

Machine IPv6 Address

As required

Interface Settings/Network

IPv6 Gateway Address

As required

Interface Settings/Network

IPv6 Stateless Setting

As required

Interface Settings/Network

DNS Configuration

As required

Interface Settings/Network

DDNS Configuration

As required

Interface Settings/Network

IPsec

As required

Interface Settings/Network

Domain Name

As required

Interface Settings/Network

WINS Configuration

As required

Interface Settings/Network

Effective Protocol

Necessary

Interface Settings/Network

Ethernet Speed

As required

Interface Settings/Network

IEEE802.1X Auth.(Ethernet)

As required

Interface Settings/Network

LAN Type

Necessary

Interface Settings/Network

Permit SNMPv3 Communictn.

As required

Interface Settings/Network

Permit SSL/TLS Comm.

As required

Interface Settings/Network

Host Name

As required

File Transfer

SMTP Server

Necessary

File Transfer

SMTP Authentication

As required

File Transfer

POP before SMTP

As required

File Transfer

Reception Protocol

As required

File Transfer

POP3/IMAP4 Settings

As required

File Transfer

Admin. E-mail Address

As required

File Transfer

E-mail Communication Port

Necessary

File Transfer

E-mail Recept. Interval

As required

File Transfer

Max. Recept. E-mail Size

As required

File Transfer

E-mail Storage in Server

As required

File Transfer

Fax E-mail Account

Necessary

Note

  • For the Effective Protocol setting, check that the protocol you want to use is set to [Active].

  • [LAN Type] is displayed when the wireless LAN interface board is installed. If both Ethernet and wireless LAN are connected, the selected interface takes precedence.

  • SMTP Server and Fax E-mail Account must be specified in order to send Internet Fax.

  • When POP before SMTP is set to [On], also make settings for Reception Protocol and POP3/IMAP4 Settings.

  • When SMTP Authentication is set to [On], also make setting for Admin. E-mail Address.

  • POP3/IMAP4 Settings, E-mail Communication Port, and Fax E-mail Account must be specified in order to receive Internet Fax.

  • When setting POP before SMTP to [On], check POP3 port number in E-mail Communication Port.