Skip header
 

Top Page > Network and System Settings Guide > Connecting the Machine > Connecting to the Interfaces

Connecting to the Interfaces

This section explains how to identify the machine's interface and connect the machine according to the network environment.

CAUTION

  • A network interface cable with a ferrite core must be used for RF interference suppression.

connecting to the interfaces illustration (numbered callout illustration)

  1. USB Host Interface

    Port for connecting the USB cable. It is used to connect device such as a digital camera to this machine.

  2. IEEE 1284 port (optional)

    Port for connecting the IEEE 1284 interface cable.

  3. USB 2.0 port

    Port for connecting the USB2.0 interface cable.

  4. 10BASE-T/100BASE-TX port

    Port for connecting the 100BASE-TX or 10BASE-T cable.

  5. Wireless LAN port (optional)

    Port for using the wireless LAN.

  6. Gigabit Ethernet port (optional)

    Port for using the 1000BASE-T, 100BASE-TX, or 10BASE-T cable.

Related topics

Connecting to the Ethernet Interface
Connecting to the Gigabit Ethernet Interface
Connecting to the USB Interface
Connecting to the IEEE 1284 Interface
Connecting to the Wireless LAN Interface