Skip header
 

Printing a List of Files in Memory (Print TX Standby File List)

Print this list if you want to find out which files are stored in memory and what their file numbers are.

Knowing the file number can be useful (for example when erasing files).

1Press the [Job Information] key.

Job Information key illustration

2Select [Print TX Standby File List] using [Up arrow key] or [Down arrow key], and then press the [OK] key.

Operation panel screen illustration

To cancel printing before pressing the [OK] key, press the [Escape] key. The standby display appears.

3Press the [Start] key.

Operation panel screen illustration

To cancel printing after pressing the [Start] key, press the [Clear/Stop] key. The display returns to that of step 2.

The display returns to that of step 2 after printing a TX Standby File List.

4Press the [Escape] key.

The standby display appears.

Note

  • The contents of a file stored in memory can also be printed.

  • If user authentication is set, you can select whether to display a sender name with the User Parameter (switch 04, bit 5) in the Fax Features menu. See “Parameter Settings”.