Skip header
 

Redial

The machine stores the latest destinations specified for each transmission method.

This function saves time when you are sending to the same destination repeatedly, as you do not have to enter the destination again.

Important

  • The following kinds of destinations are not stored:

    • Destinations specified using the destination list

    • Destinations specified as a group destination

    • Destinations specified under Memory File Transfer

    • Destinations dialed using the optional handset or the external telephone

    • Destinations dialed by Redial (regarded as already stored in memory)

    • Second and later destinations broadcasted to

    • Destinations specified in the LAN-Fax Driver on the computer

  • To redial a fax number, do not dial any numbers before you press the [Pause/Redial] key. If you press the [Pause/Redial] key after entering numbers using the number keys, a pause is entered instead.

1Place the original, and then select the scan settings you require.

2Press the [Pause/Redial] key.

Pause/Redial key illustration

3Select the destination you want to redial to using [Down arrow key] or [Up arrow key], and then press the [OK] key.

Operation panel screen illustration

4Press the [Start] key.

Operation panel screen illustration

Note

  • You can specify Internet Fax destination using the Redial function. Select this function before pressing [Manual].

  • When you press [Program], you can register a selected destination in the destination list. For details about registering a destination, see “Programming Destinations from Redial Screen”.

  • For the maximum number of redials the machine can store, see “Maximum Values”.