Specifying a destination using the Quick Dial key
You can select a fax number, IP-Fax destination, or e-mail address programmed to a Quick Dial key.
Press [
] to switch the destination type between 
and 
.
Press the Quick Dial key in which the destination's number is programmed.
The destination's name is shown on the display.
If you make a mistake, press the [Clear/Stop] key and try again.
To select more destinations, repeat steps 1 and 2.
When you add destinations, if you switch the destination type between and , press [Add Dest], and then repeat steps 1 and 2.
Press the [Start] key.
To check the contents of Quick Dial keys, print the destination list using Address Book:Print List under System Settings. For details about the printing method, see “System Settings”, Network and System Settings Guide.
You do not have to press [Add Dest] when adding the same type of destination as you specified in step 1 using the Quick Dial keys.
