Skip header
 

Selecting Type of Transmission

You can select the transmission type: standard fax, IP-Fax, or Internet Fax.

Important

  • To select IP-Fax destinations or Internet Fax destinations, the Hard Disk Drive Option and printer/scanner functions must be installed. The display differs depending on whether or not the Hard Disk Drive Option and printer/scanner functions are installed.

When sending over a fax line

Press [Operation panel screen illustration] to display Operation panel screen illustration in the destination display column.

Operation panel screen illustration

When sending to an e-mail address

Press [Operation panel screen illustration] to display Operation panel screen illustration in the destination display column.

Operation panel screen illustration

When sending by IP-Fax

To send by IP-Fax, specify the protocol. After you specify the protocol, Operation panel screen illustration appears in the destination display column.

If you are using a gatekeeper server, select H.323.

If you are using a SIP server, select SIP.

Operation panel screen illustration

Note

  • For details about IP-Fax or Internet Fax transmission, see “IP-Fax Functions” and “Internet Fax Functions”.