Konfiguration af netværkskort
Brug nedenstående kommando til at få vist indstillingerne for netværkskortet:
telnet : Brug kommandoen "show".
Protocol Up/Down
Følgende protokoller vises ("Up" betyder aktiveret; "Down" betyder deaktiveret):.
IPv4, IPv6, IPsec, NetWare, SMB
Device Up/Down
Følgende enheder vises ("Up" betyder aktiv, og "Down" betyder inaktiv):
Parallel, USB
Ethernet interface
Viser Ethernet-hastigheden.
Syslog priority
"LOG_INFO" vises.
NVRAM version
Viser NVRAM-versionen.
Device name
Viser enhedsnavnet.
Comment
Viser kommentar(er).
Location
Viser placering af enheden.
Contact
Viser kontaktoplysningerne.
Soft switch
Viser soft switch'en.
TCP/IP
Følgende elementer vises ("Up" betyder aktiv, og "Down" betyder inaktiv):
Mode (IPv4)
Mode (IPv6)
ftp, lpr, rsh, diprint, web, http, ftpc, snmp, ipp, autonet, Bonjour, ssl, nrs, rfu, nbt, ssdp, ssh, sftp, WSD (Device), WSD (Printer), WSD (Scanner), rhpp
IPv4
DHCP, Address, Netmask, Broadcast, Gateway
IPv6
Stateless, Manual, Gateway, DHCPv6-lite, DUID, DHCPv6 option lifetime
IPsec
Manual Mode, Excluded Protocol (https, dns, dhcp, wins)
EncapType
Host name
DNS Domain
Access Control
IPv4: Access Entry [1]-[5]
IPv6: Access Entry [1]-[5]
SNTP Server
Time Zone
SNTP Server polling time
SYSLOG server
Home page URL1
Home page link name1
Home page URL2
Home page link name2
Help page URL
RHPP Port
RHPP timeout
NetWare
Følgende punkter vises:
EncapType
RPRINTER number
Print server name
File server name
Context name
Switch
Mode, NDS/Bindery, Packet negotiation, Login Mode
Print job timeout
Protocol
SAP interval time
NDS Tree Name
Transfer Protocol
SMB
Følgende punkter vises:
Switch
Mode, Direct print, Notification
Workgroup name
Computer name
Comment
Share name [1]
Protocol
Wireless LAN
Følgende punkter vises:
Host name, Communication Mode, SSID, Channel, Security, WEP Authentication, WEP Encryption key number, WEP Encryption keys [1]-[4], WPA Encryption, WPA Authentication, Pre-Shared Key, User name, Domain name, EAP Type, Password, Phase 2 user name, Phase 2 Method TTLS, Phase 2 Method PEAP, Server cert., Intermediate CA, Server ID, Sub domain, Mic check
Ethernet
Følgende punkter vises:
802.1X Authentication
DNS
Følgende punkter vises:
IPv4
Server [1]-[3], Selected IPv4 DNS Server
IPv6
Server [1]-[3], Selected IPv6 DNS Server, Resolver Protocol
Domain name
Følgende punkter vises:
ether, wlan
DDNS
Følgende punkter vises:
ether, wlan
WINS
Følgende punkter vises:
ether
Primary WINS, Secondary WINS
wlan
Primary WINS, Secondary WINS
SSDP
Følgende punkter vises:
UUID, Profile, TTL
UPnP
Følgende punkter vises:
URL
Bonjour
Følgende punkter vises:
Computer Name (cname), Local Hostname (ether), Local Hostname (wlan), Location, Priority (diprint), Priority (lpr), Priority (ipp), IP TTL, LinkLocal Route for Multi I/F, IPP Port
SNMP
Følgende punkter vises:
SNMPv1v2, SNMPv3, protocol, v1Trap, v2Trap, v3Trap, SNMPv1v2 Remote Setting, SNMPv3 Privacy
ssh
Følgende punkter vises:
Compression, Port, TimeOut, LoginTimeOut
AuthFree
Følgende punkter vises:
IPv4
AuthFree Entry [1]-[5]
IPv6
AuthFree Entry [1]-[5]
Parallel
USB
LPR
Følgende punkter vises:
lprm check host, lpr prnerrchk
Certificate
Følgende punkter vises:
Verification
WS-MFP
Følgende punkter vises:
Network Device Name, Comments, Location, Presentation URL, WSD (Device) TCP Port, WSD (Printer) TCP Port, WSD (Printer) Job Timeout, WSD (Scanner) TCP Port, MetadataVersion, UUID
IEEE 802.1X
Følgende punkter vises:
User name, Domain name, EAP Type, Password, Phase 2 user name, Phase 2 Method TTLS, Phase 2 Method PEAP, Server cert, Intermediate CA, Server ID, Sub domain
Shell mode
"Brugertilstand" vises.
