Removing Jammed Paper

This section describes how to locate and remove jammed paper.

The inside of the machine could be very hot. Do not touch the parts with a label indicating the "hot surface." Otherwise, an injury might occur.

Some of this machine's internal components get very hot. For this reason, take care when removing misfed paper. Not doing so could result in burns.

When clearing misfeeds, do not turn off the operation switch. If you do, your copy settings will be lost.
To prevent misfeeds, do not leave any torn scraps of paper inside the machine.
Contact your service representative if misfeeds occur frequently.
When removing jammed sheets, take care to touch only those areas explicitly indicated in the manual.
Do not remove the fusing unit. Doing so will result in loss of print quality.
If the error message remains displayed even after you remove misfed paper, open and close the front cover.

On top of the pulled out finisher, or inside the front cover, there is a sticker explaining how to remove misfed paper.
If a detailed removal instruction appears on the right of the screen, follow it.
You can also use the procedure indicated in [System Status] to remove jammed paper.