Installing the PostScript 3 Printer Driver (Windows XP, Windows Server 2003 / 2003 R2)
This section explains how to install the PostScript 3 printer driver under Windows XP or Windows Server 2003 /2003 R2 when using the printer as a Windows network printer.
Manage Printers permission is required to install the driver. Log on as an Administrators group member.
If you print from a print server connected to the machine using the SmartDeviceMonitor for Client port, the client cannot use Recovery Printing and Parallel Printing.
If you print under Windows XP or Windows Server 2003 / 2003 R2 print server, notification functions of SmartDeviceMonitor may not be used with the client computer.
You can install the printer driver from the CD-ROM provided with this machine or download it from the manufacturer's Web site.
If you are using the 64-bit version of an operating system, download the printer driver from the manufacturer's Web site. Select this machine and the operating system you are using, and then download it.
Quit all applications currently running.
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
Select an interface language, and then click [OK].
The printer driver with the selected language will be installed. The English printer driver is installed when the following language is selected: Suomi, Magyar, Cestina, Polski, Portugues, Russian, Catala, Turkce.
Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
Click [Next >].
Click [A network printer, or a printer attached to another computer] and then click [Next >].
Select [Browse for a printer], and then click [Next >].
Double-click the computer name you want to use as a print server in the [Shared printers:] window.
Select the machine you want to use, and then click [Next >].
If a security warning message appears, click [Yes].
The printer driver installation starts.
Click [Next >].
Select [Yes] to configure the machine as default.
Click [Finish].
Restart the computer to complete installation.
To stop installation of the selected driver, click [Cancel] before installation is complete.
A user code can be set after the printer driver installation. For information about user code, see the printer driver Help.
Auto Run may not work with certain operating system settings. In that case, launch "Setup.exe" on the CD-ROM root directory.
