Skip header
 

Installing the PostScript 3 Printer Driver (Windows XP, Windows Server 2003 / 2003 R2)

This section explains how to install the PostScript 3 printer driver under Windows XP or Windows Server 2003 /2003 R2 for use on the Standard TCP/IP port.

Important

  • Manage Printers permission is required to install the driver. Log on as an Administrators group member.

  • In an IPv6 environment, you cannot use the Standard TCP/IP Port. Use the SmartDeviceMonitor for Client port.

  • You can install the printer driver from the CD-ROM provided with this machine or download it from the manufacturer's Web site.

  • If you are using the 64-bit version of an operating system, download the printer driver from the manufacturer's Web site. Select this machine and the operating system you are using, and then download it.

1Quit all applications currently running.

2Insert the CD-ROM into the CD-ROM drive.

The installer starts.

3Select an interface language, and then click [OK].

The printer driver with the selected language will be installed. The English printer driver is installed when the following language is selected: Suomi, Magyar, Cestina, Polski, Portugues, Russian, Catala, Turkce.

4Click [PostScript 3 Printer Driver].

Add Printer Wizard starts.

5Click [Next >].

6Click [Local printer attached to this computer], and then click [Next >].

7Click [Create a new port:].

8Click [Standard TCP/IP Port] in [Type of port:], and then click [Next >].

9Click [Next >] in the [Add Standard TCP/IP Printer Port Wizard] dialog box.

10Enter the machine name or IP address in the [Printer Name or IP Address] box.

The [Port Name] text box automatically obtains a port name. Change this name if necessary.

11Click [Next >].

12Click [Finish] in the [Add Standard TCP/IP Printer Port Wizard] dialog box.

13Check that the name of the machine whose driver you want to install is selected, and then click [Next >].

14Change the machine name if you want, and then click [Next >].

Select [Yes] to configure the machine as default.

15Specify whether or not to share the machine, and then click [Next >].

16Specify whether or not to print a test page, and then click [Next >].

17Click [Finish].

If the [Hardware Installation] message appears, click [Continue Anyway].

The printer driver installation starts.

Note

  • To stop installation of the selected driver, click [Cancel] before installation is complete.

  • A user code can be set after the printer driver installation. For information about user code, see the printer driver Help.

  • Auto Run may not work with certain operating system settings. In that case, launch "Setup.exe" on the CD-ROM root directory.