Skip header
 

Density (Contrast)

You can adjust the density at which the originals are scanned.

The text and diagrams on originals should stand out clearly from the paper they are on.

If the original has a darker background than normal (for example, a newspaper clipping), or if the writing is faint, adjust the density.

Auto Density

The appropriate density setting for the original is automatically selected.

  1. Make sure that [Auto Density] is selected.

    Operation panel screen illustration

Manual Density

Use manual density to set density manually.

You can select one of seven density levels.

  1. If [Auto Density] is selected, press [Auto Density] to turn it off.

  2. Press [Left arrow key] or [Right arrow key] to adjust the density.

    The indicator moves.

    Operation panel screen illustration

Combined Auto and Manual Density

You can only adjust density for photographs, illustrations, or diagrams if the original has a dark background.

You can select one of seven density levels.

  1. Make sure that [Auto Density] is selected.

  2. Press [Left arrow key] or [Right arrow key] to adjust the density.

    The indicator moves.

    Operation panel screen illustration

Note

  • Selecting [Text], [Text / Line Art], or [Text / Photo] for the original type causes [Auto Density] to be selected.

  • You can set the density that is selected right after the machine is turned on or whenever the [Clear Modes] key is pressed. See “Changing the Default Functions of the Fax's Initial Display”.