Skip header
 

Edit

This section describes the user tools in the Edit menu under Copier / Document Server Features.

Enter the width of the binding margin with the number keys as follows:

Enter the width of the erased margin with the number keys as follows:

An image of approximately 1.5 mm (0.06 inch) will not be displayed as the width of the separation line, when specifying solid or broken lines.

Front Margin: Left / Right

Specify left and right margins on the front side of copies in Margin Adjustment mode.

Default: [Left: 0.2 inch]

Back Margin: Left / Right

Specify left and right margins on the back side of copies in Margin Adjustment mode.

Default: [Right: 0.2 inch]

Front Margin: Top / Bottom

Specify top and bottom margins on the front side of copies in Margin Adjustment mode.

Default: [T / B: 0.0 inch]

Back Margin: Top / Bottom

Specify top and bottom margins on the back side of copies in Margin Adjustment mode.

Default: [T / B: 0.0 inch]

1 Sided 2 Sided Auto Margin: TtoT

In 1 sided 2 sided Duplex mode, you can specify the margins on the back side.

The margin is set to the same value of “Back Margin: Left/Right”.

Default: [Right: 0.2 inch]

1 Sided 2 Sided Auto Margin: TtoB

In 1 sided 2 sided Duplex mode, you can specify the margins on the back side.

The value set for “Back Margin: Top/Bottom” is used.

Default: [T / B: 0.0 inch]

Erase Border Width

Specify the width for erasing border.

Default: [0.4 inch]

Erase Original Shadow in Combine

In Combine mode, you can specify whether to erase a 3 mm, 0.1 inch boundary margin around all four edges of each original.

Default: [On]

Erase Center Width

Specify the width of the erased center margins with this function.

Default: [0.4 inch]

Front Cover Copy in Combine

You can make a combined copy on the front cover sheet when you select Front Cover mode.

Illustration of Front Cover Copy in Combine

Default: [Combine]

Copy Order in Combine

You can set the copy order in Combine mode to From Left to Right or From Top to Bottom.

Illustration of Copy Order in Combine

Default: [From Left to Right]

Orientation: Booklet, Magazine

Select the opening orientation of copies made using Booklet or Magazine mode.

Default: [Open to Left]

Copy on Designating Page in Combine

Specify whether to make a combined copy on the inserted slip sheets in Desig./Chapter mode.

Default: [Combine]

Image Repeat Separation Line

You can select a separation line using the Image Repeat function from: None, Solid, Broken A, Broken B, or Crop Marks.

Illustration of Image Repeat Separation Line

  1. None

  2. Solid

  3. Broken A

  4. Broken B

  5. Crop Marks

Default for “Type of Separation Line”: [None]

In “Full Color”, you can also select the color of the separation line.

Default for “Color of Separation Line in Full Color”: [Black]

Separation line color cannot be specified when selecting [None].

In “Black & White”, printing will be done in black.

Selecting solid or broken lines might produce a blank area of approximately 1.5 mm (0.06 inch) in width along the separation line.

Double Copies Separation Line

You can select a separation line using the Double Copies function from: None, Solid, Broken A, Broken B, or Crop Marks.

Illustration of Double Copies Separation Line

  1. None

  2. Solid

  3. Broken A

  4. Broken B

  5. Crop Marks

Default for “Type of Separation Line”: [None]

In “Full Color”, you can also select the color of the separation line.

Default for “Color of Separation Line in Full Color”: [Black]

Separation line color cannot be specified when selecting [None].

In “Black & White”, printing will be done in black.

Selecting solid or broken lines might produce a blank area of approximately 1.5 mm (0.06 inch) in width along the separation line.

Separation Line in Combine

You can select a separation line using the Combine function from: None, Solid, Broken A, Broken B, or Crop Marks.

Illustration of Separation Line in Combine

  1. None

  2. Solid

  3. Broken A

  4. Broken B

  5. Crop Marks

Default for “Type of Separation Line”: [None]

In “Full Color”, you can also select the color of the separation line.

Default for “Color of Separation Line in Full Color”: [Black]

Separation line color cannot be specified when selecting [None].

In “Black & White”, printing will be done in black.

Selecting solid or broken lines might produce a blank area of approximately 1.5 mm (0.06 inch) in width along the separation line.