Skip header
 

Printing Stored Documents

Prints stored documents.

Web Image Monitor allows you to print documents stored in the Document Server from your computer.

1Select a document to be printed.

If a password is set, enter it, and then press [OK].

2When printing two or more documents at a time, repeat step 1.

Up to 30 documents can be printed.

3When specifying printing conditions, press [To Printing Screen].

Operation panel screen illustration

The printing condition screen will appear. The user name, file name, and printing order of the document will be displayed.

4Enter the number of print copies with the number keys.

Operation panel screen illustration

The maximum quantity that can be set is 999.

5Press the [Start] key.

Printing will be started.

Note

  • You can search the target document using [User Name] or [File Name] situated in the left side of the screen. For details about searching the target document, see “Searching for Stored Documents”.

  • You can sort the documents by user name, file name, or creation date. Press the item to be used for the sorting on the top of the list.

  • To cancel the selection, press the selected (highlighted) key.

  • Some of the selected documents may not be printed due to the difference in the size or resolution.

  • When changing the printing order, cancel the highlight and then specify the order correctly.

  • Pressing the [Clear Modes] key cancels every selection.

  • Pressing [Order] displays the selected documents in the printing order.

  • The copy and printer features hold the specified printing conditions after the operation is over and apply them at the next printing. The facsimile features do not have the function of storing the printing conditions.

  • When two or more documents are specified, the printing conditions are stored on the first document but not on the succeeding documents.

  • Following settings are available for the printing conditions. For respective printing results, see “Basic Copying” and “Advanced Copying”.

    • Paper tray

    • The number of prints

    • 2 Sided Copy (Top to Top, Top to Bottom), Booklet, Magazine

    • Finishing (Sort / Rotate Sort / Stack / Staple / Punch)

    • Cover/Slip Sheet (Front Cover, Front/Back Cover, Designate / Chapter, Slip Sheet)

    • Edit / Stamp (Margin Adj., Stamp)

  • When printing two or more copies while selecting the Sort function, you can confirm the finish by printing only one copy. For details about sample print function, see “Sample print”.

  • When printing two or more documents at a time, you can print them as a single continuous document by specifying the order of their printing.

  • When printing two or more documents at a time, the printing conditions set for the first document are applied to all the remaining documents.

  • When two or more documents are selected, press [Up arrow key] [Down arrow key] to confirm the user name, document name and printing order of the document.

  • Pressing [File List] restores the document selection screen.

  • The Stamp function is not specifiable to the documents being stored from the facsimile features.

  • You can change the maximum print quantity under Max. Copy Quantity in User Tools. For details about Max. Copy Quantity, see “General Features”.

  • Web Image Monitor allows you to print a document stored in the Document Server from your computer. For the Web Image Monitor starting procedure, see “Displaying Stored Documents with Web Image Monitor”.