Using Pure IP in the NetWare 5 / 5.1 or 6 / 6.5 Environment

Setting up using NWadmin

1. From Windows, start NWadmin.

   For details about NWadmin, see the NetWare manuals.

2. Select the object in which the print queue is located in the directory tree, and then click [Create] on the [Object] menu.

3. In the [Class of new object] box, click [Print Queue], and then click [OK].

4. In the [Print Queue Name] box, enter the name of the print queue.

5. In the [Print Queue Volume] box, click [Browse].

6. In the [Available objects] box, click the volume in which the print queue is created, and then click [OK].

7. Check the settings, and then click [Create].

8. Select the object in which the printer is located, and then click [Create] on the [Object] menu.

9. In the [Class of new object] box, click [Printer], and then click [OK]. For NetWare 5, click [Printer (Non NDPS)].

10. In the [Printer name] box, enter the printer name.

11. Select the [Define additional properties] check box, and then click [Create].

12. Click [Assignments], and then click [Add] in the [Assignments] area.

13. In the [Available objects] box, click the queue you created, and then click [OK].

14. Click [Configuration], click [Parallel] in the [Printer type] list, and then click [Communication].

15. Click [Manual load] in the [Communication type] area, and then click [OK].

16. Check the settings, and then click [OK].

17. Select a context specified, and then click [Create] on the [Object] menu.

18. In the [Class of new object] box, click [Print Server], and then click [OK]. For NetWare 5, click [Print Server (Non NDPS)].

19. In the [Print Server Name] box, enter the print server name.

20. Select the [Define additional properties] check box, and then click [Create].

21. Click [Assignments], and then click [Add] in the [Assignments] area.

22. In the [Available objects] box, click the queue you created, and then click [OK].

23. Check the settings, and then click [OK].

24. Start the print server by entering the following from the console of the NetWare server.

    If the print server is in operation, quit and restart it.

    To quit

    CAREE: unload pserver

    To start

    CAREE: load pserver print_server_name

Setting up using Web Image Monitor

1. Log in to Web Image Monitor as an administrator.

   For details about logging in, see "Access in the Administrator Mode".

2. Click [Configuration] in the menu area, and then click [NetWare Print Settings].

3. Confirm the settings, and then click [Device Name].

   Configuration is now complete. Wait several minutes before restarting Web Image Monitor.

4. Click [Logout].

5. Quit Web Image Monitor.