Setting Up as a Print Server (NetWare 3.x)

Log in to Web Image Monitor as an administrator.

For details about logging in, see "Access in the Administrator Mode".

Click [Configuration] in the menu area, and then click [NetWare Print Settings].

• Print Server Name: Enter the NetWare print server name. To use the interface board as a print server, enter the name of a print server that is not active on the file server. Use up to 47 characters.

• Logon Mode: Specify whether to designate a file server or NDS tree when logging in to NetWare.

• File Server Name: When a file server name is entered here, only the specified file server is searched for. This item is mandatory. Use up to 47 characters.

• NDS Tree: To enable NDS mode, enter the name of the NDS tree you want to log in to. Use up to 32 alphanumeric characters.

• NDS Context Name: To enable NDS mode, enter the print server context. Use up to 127 characters.

• Operation Mode: Specify whether to use the interface board as a print server or a remote printer.

• Remote Printer No.: This item is effective when the interface board is specified as a remote printer. Enter the same number as the number of the printer to be created on the print server (0 to 254 characters).

• Job Timeout: When the interface board is used as a NetWare remote printer, the printer cannot detect when a print job ends. Therefore, the printer terminates printing when a certain period of time has elapsed since it last received print data (i.e., when it has not received print data for a certain period of time). Specify here this period of time (3 to 255 seconds). The initial value is 15 (seconds).

• Frame Type: Select the frame type from the drop-down menu.

• Print Server Protocol: Select the protocol for NetWare from the drop-down menu.

• NCP Delivery Protocol: Select the protocol for NCP delivery.

Confirm the settings, and then click [Device Name].

Configuration is now complete. Wait several before restarting Web Image Monitor.

Click [Logout].