Skip header
ManualsContentsPreviousNextHelp

Paper Input Menu Parameters

This section explains about parameters that can be set on the paper input menu.

Important

Paper Size: Bypass Tray

You can specify the paper size for Bypass Tray.

Default:

region-a (mainly Europe and Asia)
A4Portrait

region-b (mainly North America)
81/2 × 11Portrait

Paper Size: Tray 1

You can specify the paper size for Tray 1.

Default:

region-a (mainly Europe and Asia)
A4Portrait

region-b (mainly North America)
81/2 × 11Portrait

Paper Size: Tray 2

You can specify the paper size for Tray 2.

Default:

region-a (mainly Europe and Asia)
A4Portrait

region-b (mainly North America)
81/2 × 11Portrait

Paper Type: Bypass Tray

You can specify the paper type for Bypass Tray.

Default: [No Display (Plain Paper)]

Paper Type: Tray 1

You can specify the paper type for Tray 1.

Default: [No Display (Plain Paper)]

Paper Type: Tray 2

You can specify the paper type for Tray 2.

Default: [No Display (Plain Paper)]

Duplex Tray

You can set each tray for duplex printing. Only installed trays appear on the display panel.

  • Tray 1, Tray 2, and Bypass Tray

    Default: [On]

    • On

    • Off

Auto Tray Select

You can select whether to assign each tray to automatically print the paper size and type set by printer driver.

When using custom size paper, if automatic tray selection is enabled, the size selected on the control panel has priority. If this setting is disabled, the size selected from the printer driver has priority.

You can select multiple trays.

If you need to have a tray locked, you must select the tray using both printer driver and control panel.

  • Tray 1, Tray 2, and Bypass Tray

    Default: [On]

    • On

    • Off

Tray Priority

You can set a tray to be checked first when automatic tray selection is enabled from the printer driver. The tray selected here is used when no tray is selected for a print job.

It is recommended that you load paper of the size and orientation you use most frequently in the tray selected in this setting.

Default: [Tray 1]

  • Tray 1

  • Tray 2

  • Bypass Tray

Note