Adding a Virtual Printer

Use this procedure to add a virtual printer.

Adding a virtual printer requires Administrators privilege. Log in using an account that has Administrators privilege.
The following Virtual Printer protocols are available: "TCP/IP (Unspecified, Normal)", "TCP/IP (Unspecified, Priority)", "TCP/IP (DIPRINT)", "TCP/IP (RHPP)", "AppleTalk", and "NetWare".

Log in to Web Image Monitor as an administrator.
For details about logging in, see "Access in the Administrator Mode".
In the menu area, click [Configuration], and then click [Virtual Printer Settings] in the "Printer" category.
A list of the available virtual printers appears.
Click [Add].
The screen for adding virtual printers appears.
In [Virtual Printer Name], enter a name for the new printer, and then select the protocol in the [Protocol] list.
Click [OK].
The virtual printer is added.

If you select [TCP/IP (DIPRINT)], [AppleTalk], or [NetWare] in the [Protocol] list, you cannot specify a virtual printer name.
You can specify a virtual printer name using up to 47 characters.
You can add up to 50 virtual printers. After 50 virtual printers have been added, [Add] will no longer be displayed.