Skip header
ManualsContentsPreviousNextHelp

Menu Names and Brief Overview of Each Function

The following is an overview of the settings that are available on the [Basic], [Paper], and [Effects] menus.

[Basic] menu

You can specify the type of the paper you want to print on.

  • Document Size:

    If the printer's trays do not contain paper matching the settings of the print job, you can proceed with printing by using the bypass tray.

    For details about this function, see "Specifying Printer Driver or Print Command Priority".

[Paper] menu

You can enable/disable the cover and slip sheets function.

  • Paper Type:

    You can specify the type of the paper you want to print on. If the printer's trays do not contain paper matching the settings of the print job, you can proceed with printing by using the bypass tray.

    For details about this function, see "Specifying Printer Driver or Print Command Priority".

  • Front Cover

    Using this function, you can insert cover sheets fed from a different tray to that of the main paper, and print on them. For details, see "Printing on Cover Sheet".

  • Slip Sheet

    Using this function, you can insert slip sheets fed from a different tray to that of the main paper, and print on them. For details, see "Inserting Slip Sheets".

[Effects] menu

You can enable/disable the Watermark function.

The Watermark function prints text under the main content of every page of a document. For details about this function, see "Printing with Watermarks".

Note

Reference