ManualsContentsPreviousNext |
The "(Z) Open Front Cover and remove the paper." error message appears when a paper misfeed occurs inside the paper transfer unit.
|
The inside of this printer becomes very hot. Before removing paper from the area around the fusing unit, wait until both the fusing unit and the paper transfer unit have cooled down.
Pull Front Cover Open Lever, and then open the front cover with both hands carefully.
Carefully remove misfed paper under the paper transfer unit.
If you cannot find the misfed paper, look inside the printer.
Close the front cover with both hands carefully.
When closing the front cover, push the upper side of the cover firmly. After closing the cover, check that the error has cleared.