![]() ![]() ![]() | ![]() | ![]() | |
![]() | |||
![]() | |||
![]() | ![]() | ![]() | ![]() |
![]() | ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | ![]() ![]() ![]() |
When the Data in indicator does not flash or light up, check the port connection as shown below to confirm the setting.
For a parallel port connection, the port must be set to LPT 1 or LPT 2.
For a USB port connection, the port must be set to USB00(n)*.
*(n) varies depending on the number of printers connected.