ManualsContentsPreviousNext |
After installing the device certificate in the machine, enable the SSL setting.
This procedure is used for a self-signed certificate or a certificate issued by a certificate authority.
Log in to Web Image Monitor as an administrator.
In the menu area, click [Configuration].
Under "Security", click [SSL/TLS].
Click [Active] for the protocol version used in "SSL/TLS".
Select the encryption communication mode for "Permit SSL/TLS Communication".
Click [OK].
The SSL setting is enabled.
Click [OK].
Click [Logout].
Quit the Web Image Monitor.
If you set "Permit SSL/TLS Communication" to [Ciphertext Only], enter " https://(the machine's IP address or host name)/" to access the machine.