Loading paper in the optional paper feed tray

Lift and pull the optional paper feed unit, and then hold the tray with both hands, and then pull it out.

Place the tray on a flat surface.

Press down on the bottom plate until it clicks.

Pinch the clips on the side paper guide, and then adjust the guide to the paper size.

Pinch the clip on the end paper guide and align the arrow with the paper size.

Fan the paper before loading paper in the tray.

Load the new paper stack print side up.

Lift and slide the tray, then push it all the way in. Push the tray firmly to avoid a paper jam.