Skip header
 

Top Page > Hardware Guide > Loading Paper > Supported Paper for Each Tray > Standard Paper Feed Tray

Standard Paper Feed Tray

Paper types

Plain Paper, Middle Thick, Thick Paper 1, Thick Paper 2, Thin Paper, Letterhead, Label Paper, Coated Paper (Glossy), Coated Paper (Matted), Special Paper 1, Special Paper 2, Preprinted Paper, Color Paper, Recycled Paper

Paper sizes requiring manual settings

The following sizes are supported, but they must be selected using the control panel. For details about paper size settings, see "Setting a paper size by using the control panel".

A4Portrait, A5Portrait, B5 JISPortrait, 8 1/2 " × 14 " (Legal)Portrait, 8 1/2 " × 13 " (Foolscap)Portrait, 8 1/2 " × 11 " (Letter)Portrait, 8 1/4 " × 13 " (Folio)Portrait, 8 " × 13 " (F/GL)Portrait, 7 1/4 " × 10 1/2 " (Executive)Portrait, 16KPortrait, Custom Size

Custom paper size

The following custom sizes are supported, but they must be selected using the control panel. For details about custom size paper settings, see "Specifying custom size paper for standard paper feed tray".

  • Approximately 148 - 216 mm (5.83 - 8.50 inches) in width

  • Approximately 210 - 356 mm (8.27 - 14.01 inches) in length

Paper weight

60 to 163 g/m2 (16 to 43 lb.)

Paper capacity

500 sheets (80 g/m2, 20 lb.)

Do not load the paper so that the top of the stack exceeds the limit mark inside the tray.

Note

  • Duplex printing on paper that is longer than 297 mm will be slower than duplex printing on paper that is shorter.

Reference