Skip header
 

Enabling SSL

After installing the device certificate in the machine, enable the SSL setting.

This procedure is used for a self-signed certificate or a certificate issued by a certificate authority.

1Log in to Web Image Monitor as an administrator.

2In the menu area, click [Configuration].

3Under "Security", click [SSL/TLS].

4Click [Active] for the protocol version used in "SSL/TLS".

5Select the encryption communication mode for "Permit SSL/TLS Communication".

6Click [OK].

The SSL setting is enabled.

7Click [OK].

8Click [Logout].

9Quit the Web Image Monitor.

Note

  • If you set "Permit SSL/TLS Communication" to [Ciphertext Only], enter " https://(the machine's IP address or host name)/" to access the machine.