Ethernet Configuration
Configure the following network settings according to the network interface you are using.
Configure the printer for the network using the control panel.
The following table shows the control panel settings and their default values. These items appear in the [Network] under [Host Interface] menu.
Setting Name |
Default |
|---|---|
Machine IPv4 Address |
|
IPv6 Stateless Setting |
Active |
IPsec |
Inactive |
NW Frame Type |
Auto Select |
Effective Protocol |
|
Ethernet Speed |
Auto Select |
IEEE802.1X Auth.(Ethernet) |
Inactive |
Restr.IEEE802.1X Auth.Def. |
- |
LAN Type |
Ethernet |
If DHCP is in use on your network, the IP address, subnet mask, and gateway address are all set automatically.
If the printer is already placed on a TCP/IP-capable environment, you can also use a Web browser to configure the IP address-related settings.
Configure these setting as necessary. See Software Guide for details.
