Skip header
 

Top Page > Hardware Guide > Installing Options > Available Options > Order of Option Installation

Order of Option Installation

When installing multiple options, the following order is recommended:

1Attach the paper feed unit.

Attach the paper feed unit to the bottom of the printer.

You can attach up to one paper feed unit. Up to 1100 sheets of paper can be loaded in total.

2Install the SDRAM module.

There are two types of memory units, 256 MB and 512 MB.

3Install the hard disk.

4Install the optional interface board.

Install the optional Gigabit Ethernet board, Wireless LAN interface unit, or IEEE 1284 interface board in the slot.

5Insert SD card options.

Install the data overwrite security unit, NetWare card, camera direct print card, VM card, or HDD encryption unit.

Insert these units into the SD card slot.

If you want to use two or more SD cards that can be inserted in the same slot, contact your sales and service representative.