Skip headerimage
ManualsContentsPreviousNextHelp

Entering the path to the destination manually

You can enter the path to the destination folder manually.

  1. Press [Manual Entry].

    Operation panel screen illustration

  2. Press [SMB].

  3. Press [Manual Entry] on the right side of the path field.

    The soft keyboard appears.

  4. Enter the path for the folder.

    In the following example path, the shared folder name is "user" and the computer name is "desk01":

    \\desk01\user

  5. Press [OK].

  6. Depending on the destination setting, enter the user name for logging in to the computer.

    Press [Manual Entry] to the right of the user name field to display the soft keyboard.

  7. Depending on the destination setting, enter the password for logging in to the computer.

    Press [Manual Entry] for the password to display the soft keyboard.

  8. Press [Connection Test].

    A connection test is performed to check whether the specified shared folder exists.

    If the message "Connection with PC has failed. Check the settings." appears, see "Troubleshooting When Using the Scanner Function", Troubleshooting.

  9. Check the connection test result, and then press [Exit].

  10. Press [OK].

Note

Reference