Skip header
 

Changing a Scan Profile

Use the following procedure to change a scan profile.

Whenever the machine is first registered to a computer, a profile is created automatically. Using the following procedure, you can change this profile on the computer.

1On the [Start] menu, click [Control Panel].

Control Panel opens.

2Click [Hardware and Sound].

You do not have to perform this step depending on the Control Panel settings.

3Click [Scanners and Cameras].

The [Scanners and Cameras] dialog box appears.

4Select this machine, and then click [Scan Profiles].

The [Scan Profiles] dialog box appears.

5Select a profile, and then click [Edit].

The [Edit Profile] dialog box appears.

6Configure the necessary settings.

For details, see “Scan Profile Items and Settings”.

7Click [Save Profile].

The changed scan settings are saved as a profile.

To delete a profile, click [Delete] in the Scan Profiles dialog box displayed in step 4.

Note

  • If a profile does not appear in the [Scanners and Cameras] dialog box, the associated machine might be turned off, or the required WSD scanner settings might not have been specified. For details about WSD scanner settings, see "Preparation for Sending Files Using WSD".

  • If a profile does not appear in the [Scan Profiles] dialog box, recreate it as a new profile. For details, see "Creating a New Scan Profile".

  • You can create multiple profiles.