Installing the PostScript 3 Printer Driver (Windows 2000)
This section explains how to install the PostScript 3 printer driver under Windows 2000 for use on the LPR port.
Manage Printers permission is required to install the driver. Log on as an Administrators group member.
You can install the printer driver from the CD-ROM provided with this machine or download it from the manufacturer's Web site.
Quit all applications currently running.
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
Select an interface language, and then click [OK].
The printer driver with the selected language will be installed. The English printer driver is installed when the following language is selected: Suomi, Magyar, Cestina, Polski, Portugues, Russian, Catala, Turkce.
Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
Click [Next >].
Click [Local printer], and then click [Next >].
Click [Create a new port:].
Click [LPR Port], and then click [Next >].
Enter the machine's IP address in the [Name or address of server providing lpd:] box.
Enter "Ip" in the [Name of printer or print queue on that server:] box, and then click [OK].
Check that the name of the machine whose driver you want to install is selected, and then click [Next >].
Change the machine name if you want, and then click [Next >].
Select [Yes] to configure the machine as default.
Specify whether or not to share the machine, and then click [Next >].
Specify whether or not to print a test page, and then click [Next >].
Click [Finish].
If the [Digital Signature Not Found] message appears, click [Yes].
The printer driver installation starts.
To stop installation of the selected driver, click [Cancel] before installation is complete.
A user code can be set after the printer driver installation. For information about user code, see the printer driver Help.
Auto Run may not work with certain operating system settings. In that case, launch "Setup.exe" on the CD-ROM root directory.
