Skip headerimage
ManualsContentsPreviousNextHelp

PS Menu

This section describes the user tools in the PS Menu under Printer Features.

This menu appears only when an optional PostScript 3 unit is installed.

Job Timeout

You can specify how long the printer waits (in seconds) before canceling the current job when the job is interrupted while being processed.

Default: [Use Driver / Command]

If you select [Use Machine Setting(s)], enter a value between 0 and 999.

Default: "0"

When set to "0", the current job will not be canceled when interrupted.

Wait Timeout

You can specify how long the printer waits (in seconds) before it cancels receiving the job when the printer cannot detect the end of the job.

Default: [Use Driver / Command]

If you select [Use Machine Setting(s)], enter a value between 0 and 999.

Default: "300"

When set to "0", the print job will not be canceled when the end of the job cannot be detected.

Data Format

You can select a data format.

Default: [TBCP]

Resolution

You can set the print resolution in dots per inch.

Default: [600 dpi (Fast)]

Colour Setting

You can make an RGB setting.

Default: [Super Fine]

Colour Profile

You can set the color profile.

Default: [Auto]

Process Colour Model

Specify the color model.

Default: [Colour]

Orientation Auto Detect

You can specify whether or not the machine automatically detects the print orientation of received images.

If you select [On], the machine detects the orientation (Portrait/Landscape) of the received image and automatically applies the correct print orientation.

Default: [On]

Note

Reference