Using this function, you can insert cover sheet/back cover sheet fed from a different tray to that of the main paper, and print on them.
To use this function, Collate must be set.
You can print the first page of the document on the sheet for the cover page.
Front Cover sheet
Prints the first page of the document on the sheet for the cover page.
Print on one side
Prints on one side of the cover sheet only.
Print on both sides
Prints on both sides of the cover sheet when duplex printing is selected.
Cover sheet printed on both sides
Cover sheet printed on one side
Blank
When printing one side
When printing both sides
Front and Back Cover
Prints the first and last pages of the document as the cover pages.
Print on one side
Prints on one side of the cover sheets only.
Print on both sides
Prints on both sides of the front cover sheet when duplex printing is selected.
The number of pages is odd
The number of pages is even
Prints on one side of the front cover sheet when duplex printing is selected.
The number of pages is odd
The number of pages is even
Blank
When printing on one side
When printing both sides
The cover sheet/back cover sheet should be the same size and orientation as the body paper.
The same paper feed tray can be set for the body of the document and the cover sheet/back cover sheet.
When loading a cover sheet/back cover sheet in the tray, set the relevant paper size.
The cover sheet/back cover sheet can not be used when slip sheet is specified.
For printing methods, see the printer driver Help.