Skip headerimage
ManualsContentsPreviousNextHelp

Installing Device Certificate

  1. Log in to Web Image Monitor in the administrator mode.

  2. In the menu area, click [Configuration].

  3. Under "Security", click [Device Certificate].

  4. Click [Certificate 2] on the "Device Certificate" window, and then click [Request].

  5. Enter appropriate "Common Name" and "Country Code" on "Certificate Information" page, and then click [OK].

  6. "Updating..." appears. Wait for about 2 minutes, and then click [OK].

  7. Click [Details], shown in the "Device Certificate" window as the memo pad icon for "Requesting".

  8. Select all, and then copy the entire "Text for Requested Certificate" text that is displayed in the "Certificate Details" window.

  9. Access the certificate authority server, and then obtain the CA signified certificate using the text copied into "Text for Requested Certificate" windows.

    Obtaining the certificate differs depending on the environment you want to use.

  10. Click [Certificate 2] on "Device Certificate" window, and then click [Install].

  11. Using a text editor, open the CA signified certificate downloaded in step 9, and then copy over all the text.

  12. In the "Enter Certificate Request" window, paste all the text copied into the CA signified certificate.

  13. Click [OK].

  14. "Updating..." appears. Wait for about one or two minutes, and then click [OK].

  15. In the "Device Certificate" window, check that the "Certificate Status" shows "Installed".

  16. Click [Certificate 2] on "Certification", and then click [OK].

  17. Click [Logout].

  18. Quit Web Image Monitor.

Note