Skip header
 

netware

Use the "netware" command to view and configure the NetWare settings such as the print server name or file server name. The following commands are available only when the NetWare is installed.

NetWare Printer Server Names

msh> netware pname "character string"

  • Enter the NetWare print server name using up to 47 characters.

NetWare File Server Names

msh> netware fname "character string"

  • Enter the NetWare file server name using up to 47 characters.

Encap type

msh> netware encap {802.3|802.2|snap|ethernet2|auto}

Remote Printer Number

msh> netware rnum [0-254]

  • The default is 0.

Timeout

msh> netware timeout [3-255]

  • The default is 15.

Printer server mode

msh> netware mode pserver

msh> netware mode ps

Remote printer mode

msh> netware mode rprinter

msh> netware mode rp

NDS context name

msh> netware context "character string"

SAP interval

msh> netware sap_interval [0-3600]

It can be entered between 0 and 3600 seconds.

Setting login mode for file server

msh> netware login server

Setting login mode for NDS tree

msh> netware login tree

Setting login mode for NDS tree name

msh> netware tree "NDS tree name"

File transfer protocol

msh> netware trans {ipv4pri|ipxpri|ipv4|ipx}

  • If you do not specify the protocol, the current setting is displayed.

Protocol

Set Protocol

ipv4pri

IPv4+IPX(IPv4)

ipxpri

IPv4+IPX(IPX)

ipv4

IPv4

ipx

IPX