Skip header
 

Ethernet

This section lists the settings required for using WSD Scanner function with an Ethernet connection.

For details about how to specify the settings, see "Interface Settings".

Menu

User Tool

Setting Requirements

Interface Settings/Network

Machine IPv4 Address

Necessary

Interface Settings/Network

IPv4 Gateway Address

As required

Interface Settings/Network

Machine IPv6 Address

As required

Interface Settings/Network

IPv6 Gateway Address

As required

Interface Settings/Network

IPv6 Stateless Address Autoconfiguration

As required

Interface Settings/Network

DNS Configuration

As required

Interface Settings/Network

DDNS Configuration

As required

Interface Settings/Network

IPsec

As required

Interface Settings/Network

Domain Name

As required

Interface Settings/Network

WINS Configuration

As required

Interface Settings/Network

Effective Protocol

Necessary

Interface Settings/Network

NCP Delivery Protocol

As required

Interface Settings/Network

NW Frame Type

As required

Interface Settings/Network

SMB Computer Name

As required

Interface Settings/Network

SMB Work Group

As required

Interface Settings/Network

Ethernet Speed

As required

Interface Settings/Network

LAN Type

Necessary

Interface Settings/Network

Permit SNMPv3 Communication

As required

Interface Settings/Network

Permit SSL / TLS Communication

As required

Interface Settings/Network

Host Name

As required

Interface Settings/Network

Machine Name

As required

Interface Settings/Network

IEEE 802.1X Authentication for Ethernet

As required

Note

  • For the Effective Protocol setting, check that the protocol you want to use is set to [Active].

  • [LAN Type] is displayed when the wireless LAN board is installed. If Ethernet and wireless LAN are both connected, the selected interface has priority.