Skip headerimage
ManualsContentsPreviousNextHelp

Top Page > About This Machine > Adding Toner and Staples > Adding Staples

Adding Staples

This section describes what to do when staples need replacing.

Important

  1. Raise the control panel.

    Adding staples illustration

  2. Open the finisher's front cover.

    Adding staples illustration

  3. Hold the lever, and then gently pull out the cartridge.

    Adding staples illustration

  4. Holding both sides of the cartridge, remove the empty refill in the direction of the arrow.

    Adding staples illustration

  5. Push the new refill into the cartridge until it clicks.

    Adding staples illustration

  6. Hold the lever, and then push in the cartridge until it clicks.

    Adding staples illustration

  7. Close the finisher's front cover.

  8. Return the control panel to its original position.

Note

TopPreviousNext
Copyright (C) 2010