



	Manuals Contents Previous Next

Top Page > About This Machine > Read This First > Energy Saving Functions

Energy Saving Functions

To reduce its power consumption, this machine has the following functions:

Low Power Mode

If this machine remains idle for a specified period, it automatically reduces its electrical consumption.
The default period the machine waits before entering Low Power Mode is five minutes. This default time can be changed.

Sleep Mode

If this machine is already in Low Power Mode and remains idle for a specified period, it automatically enters Sleep Mode to further reduce its electrical consumption.
The default delay time the machine waits before entering Sleep Mode is 11 minute. This default time can be changed.
The machine can print jobs from computers and receive faxes while in Sleep Mode.

Specifications

	Type 1	Type 2	Type 3	Type 4
Reduced Electrical Consumption by Low Power Mode	97.6 W	106 W	99.0 W	107 W
Time of Switch into Low Power Mode	5 minutes	5 minutes	5 minutes	5 minutes
Time of Switch out from Low Power Mode	15 seconds	15 seconds	18 seconds	18 seconds
Reduced Electrical Consumption by Sleep Mode	1.3 W	1.3 W	1.3 W	1.3 W
Time of Switch into Sleep Mode	11 minutes	11 minutes	11 minutes	11 minutes
Time of Switch out from Sleep Mode	34 seconds	34 seconds	45 seconds	45 seconds

Specifications can vary depending on which options are installed on the machine.
For details about how to change the default interval, see “Timer Settings”, Network and System Settings Reference.
Depending on which Embedded Software Architecture application is installed on it, the machine might take longer than indicated to enter Sleep Mode.