Skip header
 

Adding Staples

This section describes what to do when staples need replacing.

Important

  • Stapling failures or jams may occur if you use a staple cartridge other than that recommended.

1Raise the control panel.

Adding staples illustration

2Open the finisher's front cover.

Adding staples illustration

3Hold the lever, and then gently pull out the cartridge.

Adding staples illustration

4Holding both sides of the cartridge, remove the empty refill in the direction of the arrow.

Adding staples illustration

5Push the new refill into the cartridge until it clicks.

Adding staples illustration

6Hold the lever, and then push in the cartridge until it clicks.

Adding staples illustration

7Close the finisher's front cover.

8Return the control panel to its original position.

Note

  • If you cannot pull out the upper unit, there are staples remaining inside the cartridge. Use all the staples, and do not add more.