Skip header
 

Energy Saving Functions

To reduce its power consumption, this machine has the following functions:

Low Power Mode

  • If this machine remains idle for a specified period, it automatically reduces its electrical consumption.

  • The default period the machine waits before entering Low Power Mode is five minutes. This default time can be changed.

Sleep Mode

  • If this machine is already in Low Power Mode and remains idle for a specified period, it automatically enters Sleep Mode to further reduce its electrical consumption.

  • The default delay time the machine waits before entering Sleep Mode is 11 minute. This default time can be changed.

  • The machine can print jobs from computers and receive faxes while in Sleep Mode.

Specifications


Type 1

Type 2

Type 3

Type 4

Reduced Electrical Consumption by Low Power Mode

97.6 W

106 W

99.0 W

107 W

Time of Switch into Low Power Mode

5 minutes

5 minutes

5 minutes

5 minutes

Time of Switch out from Low Power Mode

15 seconds

15 seconds

18 seconds

18 seconds

Reduced Electrical Consumption by Sleep Mode

1.3 W

1.3 W

1.3 W

1.3 W

Time of Switch into Sleep Mode

11 minutes

11 minutes

11 minutes

11 minutes

Time of Switch out from Sleep Mode

34 seconds

34 seconds

45 seconds

45 seconds

Note

  • Specifications can vary depending on which options are installed on the machine.

  • For details about how to change the default interval, see “Timer Settings”, Network and System Settings ReferenceIllustration indicating instructions stored on a CD-ROM.

  • Depending on which Embedded Software Architecture application is installed on it, the machine might take longer than indicated to enter Sleep Mode.