Skip headerimage
ManualsContentsPreviousNextHelp

Changing the User Parameters

This section describes how to set parameters.

Important

  1. Press [Facsimile Features].

  2. Press [Initial Settings].

  3. Press [Parameter Setting].

  4. Select the switch number you want to change.

  5. Select the bit number you want to change.

    When the bit number is pressed, the current value switches between 1 and 0.

    Repeat from step 5 to change another bit number for the same switch.

  6. Press [OK].

    To cancel these settings, press [Cancel]. The display returns to that of step 4.

  7. Repeat step 4 through step 6 to change the switch settings.

  8. After all the settings are finished, press [Exit].

  9. Press the [User Tools/Counter] key.