Making settings for the machine's configuration

Make settings for the machine's configuration.

On the [Start] menu, select [Control Panel]. Then select [Printers and Other Hardware], and then [Printers and Faxes].
In Windows 2000, point to [Settings] on the [Start] menu, and then click [Printers].
In Windows XP Professional or Windows Server 2003/2003 R2, select [Printers and Faxes] on the [Start] menu.
In Windows Vista or Windows Server 2008, select [Control Panel] on the [Start] menu. Then select [Hardware and Sound], and then [Printers].
In Windows 7, select [Devices and Printers] on the [Start] menu.
Select to highlight [LAN-Fax M14], then click [Properties] on the [File] menu.
In Windows 7, right click the [LAN-Fax M14], and then click [Printer Properties].
Click the [Accessories] tab, and then make the settings for [Hard Disk Unit].
Select the check boxes for [Hard Disk Unit].
Click [Apply].
Click [OK].

[Accessories] tab

The [Accessories] tab contains the following items:

Prohibit manual destination entry
Check this option to prohibit direct specification of destinations.
Enable E-mail
Check this when using Internet Fax with the LAN-Fax function.
IP-Fax
Check this option when using IP-Fax.
After checking this option, select a protocol by clicking an appropriate radio button.

If the machine's configuration is not configured as instructed, LAN-Fax functions may fail.
If the machine is connected to a network and SmartDeviceMonitor for Client is installed on your computer, the machine's configuration will be performed automatically. If the settings do not match the machine's configuration, click [Load from Device].