Skip headerimage
ManualsContentsPreviousNextHelp

Manual Reception

When a telephone call comes in, the machine rings. If the call is a fax document, you must switch manually to facsimile mode.

  1. When the machine rings, pick up the handset of the external telephone.

  2. If you hear beeps, press the [Start] key, or hold the [Facsimile] key down for a few seconds. (The [Start] key is only available in facsimile mode when an original is not placed.)

  3. If you pressed the [Start] key in step 2, press [Start RX].

  4. Replace the handset of the external telephone. The machine will start receiving.

Note