Skip headerimage
ManualsContentsPreviousNextHelp

Standard Message Stamp

Use this function to stamp a standard message at the top of the first original sent.

There are four types of standard messages: “Confidential”, “Urgent”, “Please phone”, and “Copy to corres. Section”

You can also program other messages.

Important

  1. Place the originals, and then select the scan settings you require.

  2. Press [TX Mode].

    Operation panel screen illustration

  3. Select [Option Setting].

  4. Press [Standard Message].

    Operation panel screen illustration

  5. Select the standard message to be stamped, and then press [OK].

    Operation panel screen illustration

    The selected standard message is shown above the highlighted [Standard Message].

  6. Press [OK] twice.

  7. Specify the destination, and then press the [Start] key.

    The machine cannot stamp multiple standard messages.

Note

Reference