Skip headerimage
ManualsContentsPreviousNextHelp

On Hook Dial

The On Hook Dial function allows you to dial while listening to the tone from the internal speaker.

You can send a fax checking the connection.

Important

  1. Place the original, and then select the scan settings you require.

  2. Press [On Hook].

    Operation panel screen illustration

    You will hear a low tone from the internal speaker.

    If you want to cancel this operation, press [On Hook] again.

  3. Dial.

    Operation panel screen illustration

    The machine immediately dials the destination.

    If you make a mistake, press [On Hook] or the [Clear Modes] key, and then try again.

  4. When the line is connected and you hear a high-pitched tone, press the [Start] key.

  5. Press [Start TX].

    Transmission starts.

    If you want to cancel a transmission, press the [Clear/Stop] key, and then remove the originals.

    After transmission, the standby display appears.

Note

Reference