Skip headerimage
ManualsContentsPreviousNextHelp

Sending by Internet Fax (Internet Fax Destinations)

This section explains how to specify an Internet Fax destination.

When using Internet Fax transmission, specify the e-mail address (Internet Fax destination) in place of the fax number.

Important

  1. Press [Internet Fax] to switch the transmission type to Internet Fax.

    Operation panel screen illustration

  2. Specify the sender.

    For details, see “Sender Settings”.

  3. Press [Manual Entry].

    Operation panel screen illustration

  4. Enter the Internet Fax destination, and then press [OK].

    Operation panel screen illustration

    If you enter an incorrect character, press [], [], [Backspace], or [Delete All]. Then, re-enter the characters correctly.

    To change the e-mail address after pressing [OK], press [Edit Dest.], re-enter an e-mail address, and then press [OK].

  5. To add a destination, press [Add].

    Operation panel screen illustration

  6. Specify the next destination.

    Operation panel screen illustration

    To add another destination, repeat steps 5 and 6.

    Press the transmission type tab to switch the transmission type between fax/IP-Fax, Internet Fax, e-mail, and folder.

  7. Press the [Start] key.

    The machine starts to scan the original and stores it in memory. When scanning ends, the Communicating indicator lights and transmission starts.

Note

Reference

Related topics

Bypassing the SMTP server